Kenwood Nx 3320 Programming Software

10/11/2021by admin
  • Battery Reader software for Intelligent Battery Management System KPG-180AP OTAP Manager (for NX-5000) KAS-10 ver4.0 GPS AVL & Dispatch Messaging Software NEXEDGE ® Virtual Radio IP Dispatch KAS-20 AVL AND DISPATCH SOFTWARE KAS-11 (with KVT-11) KAS-11 Image Viewer Software KVT-11 Image Encoder Unit.
  • Find your nearest Approved Kenwood Centre Where to Buy. Tweet: Key Features. Windows programming software for NX-220/320 E/E2/E3 NEXEDGE portables and NX-720/820 GE/E.

EPCOM: KPG-D3K-KENWOOD - Programming Software for NX-3000 Series. 136-174 MHz, 260 Channels, NXDN-DMR-Analog, GPS, Bluetooth, IP67, 2.

NX-3320

  • UHF:400-520 MHz (UHF: 120 MHz capability)
  • Multi-protocol digital radio: Designed to operate under an NXDN or DMR digital, and FM analog protocols
  • NXDN Conventional and Type-C & Gen2 Trunking
  • S-Trunking
  • DMR Tier III Trunking
  • DMR Tier II conventional
  • DMR Auto Slot Select
  • Site Roaming
  • Mixed Digital & FM Analog Operation allows gradual migration at your own pace
  • 7-color Light Bar Indicator on the top panel
  • 4-Line Basic Frame (2-Line Main/Sub - LCD, icon & key guide) / 14 Characters
  • 5-Line Text Message Frame (3 Lines of Text, icon & key guide)*1
  • 4-way Directional-pad (D-pad) for intuitive control and operation
  • Built-in GPS Receiver/Antenna for effective fleet management
  • Built-in Bluetooth for hands-free operation
    Applicable Bluetooth profiles: HSP(Headset Profile provided) and SPP (Serial Port Profile available as an option)
  • Renowned KENWOOD Audio Quality can be achieved with Active Noise Reduction (ANR) that utilizes built-in DSP
  • Software DES and AES Encryptions for NXDN Conventional/Trunking and DMR Conventional protocols
  • Built-in Motion Sensor (Man-down, Stationary and Motion Detection)
  • Intrinsically Safe Option
  • IP54/55/67**2 and MIL-STD-810 C/D/E/F/G
  • Available models: Full Keypad (w/ LCD and full keypad), Standard Keypad (w/ LCD and 4-way large D-pad/4 key), and Basic (w/o LCD and keypad)
  • 2-pin audio connector (14-pin Universal connector models, NX-3200/3300, are also available)
Nx-3320

1 The number of lines may vary depending on the display language(character set).

2 All interfaces must be fully sealed with appropriate covers or by designated genuine accessories.

Brochure

Radio in used for confirmation

ModelBuilt in BluetoothFirmware VersionKPG-D1/ D1N (Radio Programming Software) Version
VersionClassProfile/Service

4.0

Headset Profile
Serial Port Profile
Heart Rate Service
Automatic Injury Detection Service

2.60 or later

4.0

Headset Profile
Serial Port Profile

2.60 or later

4.0

Headset Profile
Serial Port Profile

3.10 or later

4.0

Headset Profile
Serial Port Profile

3.00 or later

4.0

Headset Profile
Serial Port Profile

4.20 or later

4.0

Headset Profile
Serial Port Profile
Heart Rate Service
Automatic Injury Detection Service

2.60 or later

4.0

Headset Profile
Serial Port Profile

2.60 or later

ModelBuilt in BluetoothFirmware VersionKPG-D3/ D3N (Radio Programming Software) Version
VersionClassProfile/Service

4.0

Headset Profile
Serial Port Profile
Heart Rate Service
Automatic Injury Detection Service

1.40 or later

4.0

Headset Profile
Serial Port Profile

1.40 or later

4.0

Headset Profile
Serial Port Profile
Heart Rate Service
Automatic Injury Detection Service

2.00 or later

4.0

Headset Profile
Serial Port Profile

2.00 or later

4.0

Headset Profile
Serial Port Profile

1.40 or later

4.0

Headset Profile
Serial Port Profile

2.00 or later

Kenwood Nx 3320 Programming Software

  • Headset Profile headsets and Heart Rate Service sensors available on the market can also be used. However, operation is not checked for Headset Profile headsets and Heart Rate Service sensors available on the market.
  • To transmit when using a Headset Profile headset without PTT, use the PTT switch of the radio.
  • Following table shows the list of tested devices and the setting information required for PTT function over Bluetooth device.
  • Please note that compatibility test was held with products as of Last Updated Date. JVCKENWOOD does not take any responsibility for any changes made by listed manufactures after tested date.
  • The device supporting the Heart Rate Service function or the Automatic Injury Detection Service function and the headset supporting Headset Profile cannot be connected to the transceiver together. Only the one connected to the transceiver first can be used.
  • The NX-5000 Series having Version 2.5 or earlier and the NX-3000 Series having Version 1.3 or earlier support Bluetooth 3.0. Also, these support only Headset Profile and Serial Port Profile.
ManufactureProduct NameConnection Type*1Remarks

Headset 1

Headset 2

BTH-LMIC

Headset 1

BTH-300-NX

Headset 1

BTH-700/800/900

*2

Peltor WS XP (MT53H7AWS5 / MT53H7BWS5 / MT53H7P3EWS5)

*4

Peltor WS ProTac XP (MT15H7AWS5/ MT15H7BWS5/ MT15H7P3EWS5)

*4

Peltor WS LiteCom Pro III (MT73H7A4D10NA / MT73H7B4D10NA / MT73H7P3E4D10NA)

*4

SM1P

Headset 1

SM1x

Headset 1

smartPlug (SMPLUG03001)

BTR-155 Radio (K551061)

PTT Voice Responder

G1 SCBA

Kenwood Nx-3320 Programming Software

  • *1 Bluetooth Headset Connection Type can be configured by Programming Software and/or Radio Menu
  • *2 Radio's Bluetooth Device Name must be set as 'RadioDongle' in order to use BTH-300 or BTH-600.
  • *3 If PTT does not work despite of the proper setting, it's might be due to the firmware of the device form PRYME.
    Please call 1-714-257-0300 at PRYME who would be able to resolve that.
  • *4 The product name represents the style of the headset.
    A: Headset, B: Neckband, P3E: Helmet attachment
ManufactureProduct NameRemarks

TICKR Heart Rate Monitor

  • * The radio for which Bluetooth Data (KWD-5003BT/KWD-3002BT) is permitted can use Heart Rate Service.
  • * If the Heart Rate Service sensor is removed from the strap, the Heart Rate Service sensor notifies a heart rate of 0 bpm to the transceiver for a few seconds. After that, the Bluetooth connection is automatically reset. To ensure that the transceiver does not automatically send the status or activate Emergency erroneously by using the Lower Threshold function upon notification of a heart rate of 0 bpm, reset the Bluetooth connection to the Heart Rate Service sensor by using Bluetooth My Devices Mode of the transceiver before removing the Heart Rate Service sensor from the strap. Or, configure Delay Time for a sufficient length of time.

Compatible Bluetooth Automatic Injury Detection Sensor List

Kenwood Nx-3320 Programming Software

ManufactureProduct NameRemarks

AID Dual Mode-Radio/Cell Sensor Panel (AID 1002-2-SSS)

  • * The radio for which Bluetooth Data (KWD-5003BT/KWD-3002BT) is permitted can use Automatic Injury Detection Service.
Comments are closed.